Samsung Washer 4E — Water supply error (older code, same as 4C)
Samsung Washer · Error code 4E
What 4E Means
Water supply error (older code, same as 4C).
Most Likely Fix
Water supply error (older code, same as 4C)
Tools: screwdriver, pliers, towel
Diagnose first: Check that both hot and cold supply valves are fully open and hoses aren't kinked before replacing parts.
Find this part on Amazon →If the primary fix doesn't resolve it:
Symptoms
- 4E shown on the display
- Water supply error (older code, same as 4C)
Common Causes
Check that both hot and cold supply valves are fully open and hoses aren't kinked before replacing parts.
If the primary fix does not resolve the code, this is the next part to test.
How to Fix It
- Check that both hot and cold supply valves are fully open and hoses aren't kinked before replacing parts.
- If diagnosis confirms the fault, replace the water inlet valve assembly (typical cost $25-50, about 45 min, moderate DIY).
- Still throwing 4E? Test the fill hoses with screens next ($15-25).
Parts You May Need
If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.
More Samsung Washer Codes
Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician.