GE Washer FF — Fill failure
GE Washer · Error code FF
What FF Means
Fill failure - washer not reaching target water level.
Most Likely Fix
Fill failure - washer not reaching target water level
Tools: screwdriver, nut driver, pliers
Diagnose first: Verify supply hoses are open and screens not clogged before condemning the valve. Pressure sensor or its air hose can also report incorrect level.
Find this part on Amazon →If the primary fix doesn't resolve it:
Symptoms
- FF shown on the display
- Fill failure
Common Causes
Verify supply hoses are open and screens not clogged before condemning the valve. Pressure sensor or its air hose can also report incorrect level.
If the primary fix does not resolve the code, this is the next part to test.
How to Fix It
- Verify supply hoses are open and screens not clogged before condemning the valve. Pressure sensor or its air hose can also report incorrect level.
- If diagnosis confirms the fault, replace the water inlet valve (typical cost $25-60, about 30 min, easy DIY).
- Still throwing FF? Test the pressure switch / water level sensor next ($20-50).
Parts You May Need
If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.
More GE Washer Codes
Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician.