9E Moderate Easy DIY

Samsung Dishwasher 9E — Low Water Level

Samsung Dishwasher · Error code 9E

What 9E Means

9E means the water level in the tub is too low for proper washing — the dishwasher cannot circulate enough water.

Symptoms

  • Poor cleaning
  • Cycle errors out
  • 9E on the display

Common Causes

1
Low fill / partial supply

A partly closed valve or low pressure under-fills the tub.

2
Clogged filter affecting circulation

Debris reduces effective water level.

3
Float/level sensor fault

A stuck float or bad sensor mis-reads level.

How to Fix It

  1. Open the supply valve fully and confirm pressure.
  2. Clean the bottom filter and sump.
  3. Check the float for free movement.

Parts You May Need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

Common replacement Samsung Dishwasher Inlet Valve View on Amazon→

More Samsung Dishwasher Codes

1C 1C — Low water level / fails to start 1E 1E / IE — Filter clogged / heater fault 3C 3C Error — Wash Pump Failure 3E 3E — Hot water supply too hot 4C 4C / 4E — Water Supply Error 4C5 4C5 / 4E5 — Fill timeout with dry tub

All Samsung codes → All dishwasher codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician.