Bosch Oven E0111 — Stuck Control Button
Bosch Oven · Error code E0111
What E0111 Means
The control board is detecting continuous input from a button on the touchpad or control panel, as if it were being held down. The oven locks out other functions until the stuck signal clears.
Symptoms
- Oven won't respond to other buttons
- E0111 (or E111) flashing on display
- Beeping that won't stop
- Oven won't start a cooking cycle
Common Causes
Moisture under a membrane key holds the contact closed.
Crumbs or debris wedged under a hard key keep it depressed.
Aged ribbon or capacitive layer shorts internally.
Input channel on the user-interface board has failed.
How to Fix It
- Cut power at the breaker for 5 minutes, then restore — a one-time glitch often clears.
- Wipe the entire touchpad/control panel dry with a soft cloth; pay attention to seams.
- Press each button firmly once to dislodge debris; listen for any that don't click back.
- If the code returns immediately, the touch panel/membrane is failing — schedule replacement.
- If a specific hard button stays depressed, replace the keypad assembly.
Parts You May Need
If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.
More Bosch Oven Codes
Verified against manufacturer documentation: genuinereplacementparts.com
Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician.