door Minor Easy DIY

Maytag Microwave 'door' — Door Not Closed / Open Reminder

Maytag Microwave · Error code door

What door Means

The control senses the door is open or not fully latched and reminds the user to close it.

Symptoms

  • 'door' message on display
  • Microwave will not start
  • Light may be on indicating door-open state

Common Causes

1
Door not fully closed

Latch did not engage; door pushed but not closed firmly.

2
Worn door latch

Plastic latch hooks worn or broken.

3
Failed primary door switch

Switch stuck in open position.

4
Misaligned door

Sagging hinges prevent the door from closing fully on switches.

How to Fix It

  1. Open and firmly re-close the door until you hear the latch engage.
  2. Inspect the latch hooks on the door for cracks or wear.
  3. Inspect the door frame switch openings for debris.
  4. If the message persists, unplug the microwave and test door switches for continuity (see F5E1 procedure).
  5. Replace worn latch assembly or failed door switch as needed.

Parts You May Need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

Common replacement Maytag microwave door latch assembly View on Amazon→ Common replacement Maytag microwave door switch View on Amazon→

More Maytag Microwave Codes

F1E1 F1E1 — Main Control Board Failure F1E2 F1E2 — ACU EEPROM / Memory Error F2E1 F2E1 — Stuck Key on Keypad F2E2 F2E2 — User Interface Mismatch F3E1 F3E1 — Humidity Sensor Failure F4E1 F4E1 — Shorted Sensor

All Maytag codes → All microwave codes →

Verified against manufacturer documentation: maytag.com

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician.