IE Moderate Easy DIY

LG Dishwasher IE — Not Filling With Water

LG Dishwasher · Error code IE

What IE Means

IE (Inlet Error) means the dishwasher did not fill to the expected water level within the time limit.

Most Likely Fix

Water inlet error - not filling

PartWater inlet valve
Typical cost$30-65
Difficultymoderate
Time45 min

Tools: screwdriver, pliers, towels

Diagnose first: Failed inlet solenoid or a clogged inlet screen; verify supply line is open before replacing the valve.

Find this part on Amazon →

Symptoms

  • Dishwasher will not fill
  • Cycle stalls at the start
  • IE on the display

Common Causes

1
Supply valve closed or low pressure

The under-sink water supply valve must be open with normal pressure.

2
Clogged inlet valve screen

The mesh screen at the inlet valve traps sediment.

3
Faulty water inlet valve

A valve that will not open electrically.

How to Fix It

  1. Confirm the under-sink supply valve is fully open.
  2. Turn off the water and clean the inlet valve screen.
  3. Test and replace the inlet valve if it will not open.

Parts You May Need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

Common replacement LG Dishwasher Water Inlet Valve View on Amazon→

Related Repair Guides

Dishwasher Not Filling With Water — Causes and Fixes →

More LG Dishwasher Codes

2H 2H — Delay-start indicator (2 hours remaining) AE AE — Leak Detected (Aqua Error) bE bE — Bubble / oversuds error CE CE — Motor / communication error CL CL — Child lock / control lock active CR CR — Test / calibration mode

All LG codes → All dishwasher codes →

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician.