F9E1 Moderate Moderate DIY

Amana Refrigerator F9E1 — Icemaker Fault

Amana Refrigerator · Error code F9E1

What F9E1 Means

The icemaker assembly reported an error — typically the optics (emitter/receiver) or the icemaker module itself failed self-test.

Symptoms

  • F9E1 code
  • No ice production
  • Ice bin not filling
  • Icemaker arm in wrong position

Common Causes

1
Failed icemaker assembly

Module thermistor or motor failure.

2
Blocked optical sensor (in-door ice)

Ice or frost on emitter/receiver lenses.

3
Wiring fault to icemaker

Pinched harness at the freezer door hinge.

How to Fix It

  1. Remove the ice bin and check for jammed cubes.
  2. Wipe optical sensors clean on both sides of the freezer near the bin.
  3. Cycle the icemaker manually using the test points or the on/off switch.
  4. If F9E1 persists, replace the icemaker assembly.
  5. Allow 24 hours for the first new harvest after replacement.

Parts You May Need

If diagnosis points to a failed part, these are the common replacements. As an Amazon Associate we earn from qualifying purchases.

Common replacement Icemaker assembly (model-specific) View on Amazon→

More Amana Refrigerator Codes

5Y EF 5Y EF — Evaporator Fan Fault CE CE — Communication Error CF CF — Condenser Fan Fault dE dE — Defrost System Fault F1E1 F1E1 — Main Control Board Fault F1E2 F1E2 — Main Control to UI Communication Loss

All Amana codes → All refrigerator codes →

Verified against manufacturer documentation: amana.com

Always unplug an appliance before servicing it. This guide is for informational purposes and is not a substitute for a qualified technician.